Ultrahigh Loading Copper Single Atom Catalyst for Palladium-free Wacker Oxidation

Wacker oxidation is an industry-adopted process to transform olefins into value-added epoxides and carbonyls. However, traditional Wacker oxidation involves the use of homogeneous palladium and copper catalysts for the olefin addition and reductive elimination. Here, we demonstrated an ultrahigh loading Cu single atom catalyst(14% Cu, mass fraction) for the palladium-free Wacker oxidation of 4-vinylanisole into the corresponding ketone with N-methylhydroxylamine hydrochloride as an additive under mild conditions. Mechanistic studies by ¹⁸O and deuterium isotope labelling revealed a hydrogen shift mechanism in this palladium-free process using N-methylhydroxylamine hydrochloride as the oxygen source. The reaction scope can be further extended to Kucherov oxidation. Our study paves the way to replace noble metal catalysts in the traditional homogeneous processes with single atom catalysts.     

石墨烯负载的氧配位钴单原子稳定金属锂负极

Lithium (Li)-based batteries are the dominant energy source for consumer electronics, grid storage, and electrified transportation. However, the development of batteries based on graphite anodes is hindered by their limited energy density. With its ultrahigh theoretical capacity (3860 mAh∙g⁻¹), low redox potential (−3.04 V), and satisfactorily low density (0.54 g∙cm⁻³), Li metal is the most promising anode for next-generation high-energy-density batteries. Unfortunately, the limited cycling life and safety issues raised by dendrite growth, unstable solid electrolyte interphase, and "dead Li" have inhibited their practical use. An effective strategy is to develop a suitable lithiophilic matrix for regulating initial Li nucleation behavior and controlling subsequent Li growth. Herein, single-atom cobalt coordinated to oxygen sites on graphene (Co-O-G SA) is demonstrated as a Li plating substrate to efficiently regulate Li metal nucleation and growth. Owing to its dense and more uniform lithiophilic sites than single-atom cobalt coordinated to nitrogen sites on graphene (Co-N-G SA), high electronic conductivity, and high specific surface area (519 m²∙g⁻¹), Co-O-G SA could significantly reduce the local current density and promote the reversibility of Li plating and stripping. As a result, the Co-O-G SA based Li anodes exhibited a high Coulombic efficiency of 99.9% at a current density of 1 mA∙cm⁻² with a capacity of 1 mAh∙cm⁻², and excellent rate capability (high current density of 8 mA∙cm⁻²). Even at a high plating capacity of 6 mAh∙cm⁻², the Co-O-G SA electrode could stably cycle for an ultralong lifespan of 1300 h. In the symmetric battery, the Co-O-G SA based Li anode (Co-O-G SA/Li) possessed a stable voltage profile of 18 mV for 780 h at 1 mA∙cm⁻², and even at a high current density of 3 mA∙cm⁻², its overpotential maintained a small hysteresis of approximately 24 mV for > 550 h. Density functional theory calculations showed that the surface of Co-O-G SA had a stronger interaction with Li atoms with a larger binding energy, −3.1 eV, than that of Co-N-G SA (−2.5 eV), leading to a uniform distribution of metallic Li on the Co-O-G SA surface. More importantly, when matched with a sulfur cathode, the resulting Co-O-G SA/lithium sulfur full batteries exhibited a high capacity of 1002 mAh∙g⁻¹, improved kinetics with a small polarization of 191 mV, and an ultralow capacity decay rate of 0.036% per cycle for 1000 cycles at 0.5C (1C = 1675 mA∙g⁻¹) with a steady Coulombic efficiency of nearly 100%. Therefore, this work provides novel insights into the coordination environment of single atoms for the chemistry of Li metal anodes for high-energy-density batteries.     

单重工作休假M/M/c排队驱动的流体模型分析

该文在M/M/c排队驱动系统中加入工作休假策略,研究了单重工作休假多服务台排队驱动的流体模型.利用拟生灭过程和矩阵几何解法得到驱动系统稳态队长分布.构建净输入率结构,导出流体模型的稳态联合分布函数满足的的矩阵微分方程组,进而利用Laplace-Stieltjes变换(LST)方法得到稳态下缓冲器库存量的空库概率及均值表达式.最后,给出模型在多信道无线Mesh网下的应用,通过数值例子展示参数变化对系统性能指标的影响.     

Carbon nanotube dielectrophoresis: Theory and applications

Carbon nanotubes (CNTs) are one of the most extensively studied nanomaterials in the 21st century. Since their discovery in 1991, many studies have been reported advancing our knowledge in terms of their structure, properties, synthesis, and applications. CNTs exhibit unique electrothermal and conductive properties which, combined with their mechanical strength, have led to tremendous attention of CNTs as a nanoscale material in the past two decades. To introduce the various types of CNTs, we first provide basic information on their structure followed by some intriguing properties and a brief overview of synthesis methods. Although impressive advances have been demonstrated with CNTs, critical applications require purification, positioning, and separation to yield desired properties and functional elements. Here, we review a versatile technique to manipulate CNTs based on their dielectric properties, namely dielectrophoresis (DEP). A detailed discussion on the DEP aspects of CNTs including the theory and various technical microfluidic realizations is provided. Various advancements in DEP-based manipulations of single-walled and multiwalled CNTs are also discussed with special emphasis on applications involving separation, purification, sensing, and nanofabrication.     

正电子冲击下氦电离三重微分截面的理论计算

我们发展了一种正电子碰撞原子电离的畸变波Born近似方法， 在这个方法中，正负电子偶素通道通过一个ab initio的光学势附加到入射粒子和靶的相互作用势上，且通道对电离作用被第一次被考虑在正电子碰撞原子电离的过程中. 应用这个方法计算了在50 eV入射能量范围氦的电离的三重微分截面，计算结果和实验数据很好的符合.     

A new nonlinear optical silicate carbonate K2Ca[Si2O5](CO3) with a hybrid structure of kalsilite and soda-like layered fragments

Single crystals of a new silicate carbonate, K₂Ca[Si₂O₅](CO₃), have been synthesized in a multi-components hydrothermal solution with a pH value close to neutral and a high concentration of a carbonate mineralizer. The new compound has an axial structure (s.g. P6₃22) with unit cell parameters a = 5.04789 (15), c = 17.8668 (6) Å. Pseudosymmetry of the structure corresponds to s.g. P6₃/mmc which is broken only by one oxygen position. The structure consists of two layered fragments: one of the type of the mineral kalsilite (KAlSiO₄) and the other of the high-temperature soda-like α-Na₂CO₃, Ca substituting for Na. The electro-neutral layer K₂[Si₂O₅] (denoted K) as well as the layer Ca(CO₃) (denoted S) may separately correspond to individual structures. In K₂Ca[Si₂O₅](CO₃) the S-K layers are connected together via Ca-O interactions between Ca atoms from the carbonate layer and apical O atoms from the silicate one, and also via K-O interlayer interactions. A hypothetical acentric structure, sp.gr. P-62c, is predicted on the basis of the order-disorder theory. It presents another symmetrical option for the arrangement of K-layers relative to S-layers. The K,Ca-silicate-carbonate powder produces a moderate SHG signal that is two times larger that of the α-quartz powder standard and close to other silicates with acentric structures and low electronic polarizability.     

K6In2Q6 (Q = S,Se, Te): Missing Links in the Series of Alkali Chalcogenido Ditrielates(III)

The chalcogenido indates K₆In₂Q₆ (Q = S, Se, Te) were synthesized from melts of the pure elements at a maximum temperature of 700 °C. All three potassium salts contain dinuclear units [In₂Q₆]^6– of two edge-sharing [InQ₄] tetrahedra. The sulfido and the selenido indate are isotypic and crystallize in the K₆Mn₂O₆-type structure [monoclinic, space group P2₁/c, a = 784.32(9)/809.32(3), b = 1274.58(14)/1322.37(4), c = 836.48(9)/870.53(3) pm, β = 97.900(2)/97.5877(8)°, Z = 2, R₁ = 0.0123/0.0109; for Q = S/Se]. The tellurido indate K₆In₂Te₆ crystallizes in a new orthorhombic structure type [space group Pnma, a = 1793.70(12), b = 1491.55(11), c = 837.40(6) pm, Z = 4, R₁ = 0.0157]. In this structure, the telluride anions form a hexagonal close packing, in which K⁺ cations occupy all octahedral voids; the In³⁺ ions take 1/6 (but always adjacent) tetrahedral voids. This structure-chemical relation to the h.c.p. packing, which is similarly found for most of the sodium dimetallates (e.g. Na₆Fe₂S₆), is substantiated by a full crystallographic group-subgroup tree. The crystal chemistry of the new indates is discussed and compared with that of alkali chalcogenido metallates(III) of Fe, Al and Ga containing [M₂Q₆]^6– dimers, which overall form as many as ten different structure types. DFT band structure calculations of the three title compounds exhibit bandgaps, which continuously decrease from the S to the Te compound and which are also in accordance with the pale yellow (S), bright yellow (Se) and red-brown (Te) color of the compounds. The chemical bonding in the salts and within the metallate anion is discussed on the basis of the partial DOS and a Bader analysis of the calculated electron density.     

Decorating Single-Atomic Mn Sites with FeMn Clusters to Boost Oxygen Reduction Reaction

The regulation of electron distribution of single-atomic metal sites by atomic clusters is an effective strategy to boost their intrinsic activity of oxygen reduction reaction (ORR). Herein we report the construction of single-atomic Mn sites decorated with atomic clusters by an innovative combination of post-adsorption and secondary pyrolysis. The X-ray absorption spectroscopy confirms the formation of Mn sites via Mn-N₄ coordination bonding to FeMn atomic clusters (FeMn_ac/Mn-N₄C), which has been demonstrated theoretically to be conducive to the adsorption of molecular O₂ and the break of O−O bond during the ORR process. Benefiting from the structural features above, the FeMn_ac/Mn-N₄C catalyst exhibits excellent ORR activity with half-wave potential of 0.79 V in 0.5 M H₂SO₄ and 0.90 V in 0.1 M KOH as well as preeminent Zn-air battery performance. Such synthetic strategy may open up a route to construct highly active catalysts with tunable atomic structures for diverse applications.     

Liquid Fluxional Ga Single Atom Catalysts for Efficient Electrochemical CO2 Reduction

Precise design and tuning of the micro-atomic structure of single atom catalysts (SACs) can help efficiently adapt complex catalytic systems. Herein, we inventively found that when the active center of the main group element gallium (Ga) is downsized to the atomic level, whose characteristic has significant differences from conventional bulk and rigid Ga catalysts. The Ga SACs with a P, S atomic coordination environment display specific flow properties, showing CO products with FE of ≈92 % at −0.3 V vs. RHE in electrochemical CO₂ reduction (CO₂RR). Theoretical simulations demonstrate that the adaptive dynamic transition of Ga optimizes the adsorption energy of the *COOH intermediate and renews the active sites in time, leading to excellent CO₂RR selectivity and stability. This liquid single atom catalysts system with dynamic interfaces lays the foundation for future exploration of synthesis and catalysis.     

Reversible Switching CuII/CuI Single Sites Catalyze High-rate and Selective CO2 Photoreduction

Herein, we first design a model of reversible redox-switching metal–organic framework single-unit-cell sheets, where the abundant metal single sites benefit for highly selective CO₂ reduction, while the reversible redox-switching metal sites can effectively activate CO₂ molecules. Taking the synthetic Cu-MOF single-unit-cell sheets as an example, synchrotron-radiation quasi in situ X-ray photoelectron spectra unravel the reversible switching Cu^II/Cu^I single sites initially accept photoexcited electrons and then donate them to CO₂ molecules, which favors the rate-liming activation into CO₂^δ−, verified by in situ FTIR spectra and Gibbs free energy calculations. As an outcome, Cu-MOF single-unit-cell sheets achieve near 100 % selectivity for CO₂ photoreduction to CO with a high rate of 860 μmol g⁻¹ h⁻¹ without any sacrifice reagent or photosensitizer, where both the activity and selectivity outperform previously reported photocatalysts evaluated under similar conditions.